美國閥門知識(美標閥門)
Valve Knowledge
一、閥門結構種類、材質、認證
Valve Design, Materials, and Approvals
閥門結構種類
Valve Design Choices
1. 多回轉閥門
1. Multi-Turn
a) 閘閥
a) Gate
b) 截止閥/角-截止閥
b) Globe/Angle-Globe
2. 90o回轉閥門
2. Quarter-Turn
a) 球閥
a) Ball
b) 蝶閥－彈性閥座
b) Butterfly-resilient seated
3. 止回閥（阻止倒流）
3. Check (backflow prevention)
a) 旋啟式
a) Swing
b) 升降式
b) Lift
c) 彈簧驅動式
c) Spring-actuated
4. 連接端口
4. End connections
材質
Materials
1. 青銅（壓力150 psi下溫度可達287oC；溫度65oC下壓力可達600 psi），通徑范圍：DN8至DN80
1. Bronze (up to 550°F at 150 psi/up to 600 psi at 150°F) 1/4"-3"
2. 鑄鐵（壓力250 psi下溫度可達232oC；溫度37oC下壓力可達500 psi），通徑范圍：DN50至DN600
2. Cast Iron (up to 450°F at 250 psi/up to 500 psi at 100°F) 2"-24"
3. 球墨鑄鐵（壓力125 psi下溫度可達343oC；溫度37oC下壓力可達600 psi），通徑范圍：DN50至DN300
3. Ductile Iron (up to 650°F at 125 psi/up to 600 psi at 100°F) 2"-12"
4. 不銹鋼（壓力125 psi下溫度可達343oC；溫度37oC下壓力可高達2000 psi），通徑范圍：DN8至DN300
4. Stainless Steel (up to 650°F at 125 psi/up to 2000 psi at 100°F) 1/4"-12"
認證
Approvals
1. 美國閥門和管件制造商標準化協會（MSS）
1. Manufacturers Standardization Society (MSS)
2. 消防安全認證（UL®和FM）
2. Fire protection (UL® and FM)
3. 州立標準和地方標準
3. State and local codes.
二、閥門選型、功能，及管道系統的主要因素
Function and service considerations
選型
Selection
在建筑物管道系統中，閥門起著控制流體的作用。由于結構和材質的不同，因此制造出的閥門也就各不相
同。
Valves serve the purpose of controlling the fluids in building services piping. Valves are
produced in a variety of design types and materials.
為了保證管道系統能夠?qū)崿F(xiàn)最高的效率，最低的成本和最長的使用壽命，閥門的正確選型至關重要。
Proper selection is important to ensure the most efficient, cost-effective and long-lasting
systems.
功能
Function
閥門具有四種主要功能：
Valves are designed to perform four principal functions:
1. 啟動和阻止介質流動
1. Starting and stopping the flow
2. 調節（節流）介質流量
2. Regulating (throttling) the flow
3. 阻止倒流或回流
3. Preventing reversal of the flow
4. 調節或泄放流體壓力
4. Regulating or relieving the pressure of the flow
管道系統的主要因素
Service Considerations
1. 壓力
1. Pressure
2. 溫度
2. Temperature
3. 流體介質類型
3. Type of fluid
a) 流體
a) Liquid
b) 氣體：例如，蒸汽或空氣
b) Gas; i.e., steam or air
c) 雜質或研磨劑（侵蝕性物質）含量
c) Dirty or abrasive (erosive)
d) 腐蝕性
d) Corrosive
4. 介質流動
4. Flow
a) 開啟-關閉調節
a) On-off throttling
b) 需要防止倒流或回流
b) Need to prevent flow reversal
c) 關注壓降
c) Concern for pressure drop
d) 流速
d) Velocity
5. 工作環境
5. Operating conditions
a) 冷凝
a) Condensation
b) 工作頻率
b) Frequency of operation
c) 可接近性
c) Accessibility
d) 外形尺寸/所適用的空間
d) Overall size/space available
e) 手動或自動控制
e) Manual or automated control
f) 需要具有無氣泡關閉性能
f) Need for bubble-tight shut-off
三、連接方式
End Connection
a) 螺紋連接的多回轉閥門、止回閥和球閥中的連接螺紋多為符合美國國家標準協會ANSI的錐形陰螺紋，通常用
于DN65和DN80管道上。
a) Threaded-end multi-turn valves, check valves and ball valves with ANSI female taper
threads are most commonly used with pipe up to 2 1/2” or 3”.
b) 焊接連接端口可以將通徑達DN80的青銅多回轉閥門、止回閥和球閥直接連接在銅管上。在焊接過程中，
必須要小心謹慎，避免由于溫度過高導致閥門受到損害。
b) Solder-end valves permit directly connecting bronze multi-turn valves, check valves and
ball valves up to 3” to copper tubing. Care must be taken not to overheat and damage valves
during the soldering process.
c) 法蘭連接常用于DN50以上的多回轉鑄鐵閥門的安裝上。
c) Flanged-end connections are the most common used design for installation of iron multi-
turn valves 2” and larger.
d) 平板（對夾）和凸耳閥體主要用于蝶閥和升降式/雙門止回閥上，這種結構的閥門在兩個法蘭之間安裝
容易迅速。
d) Wafer and lug body styles are used with butterfly valves and lift/double-door check valves
for quick, easy installation between two flanges.
e) DN50以上的管狀連接端口的球閥、蝶閥和止回閥安裝最迅速。
e) Grooved end ball, butterfly and check valves permit the quickest installation sizes 2”
and larger.
四、室內冷熱水系統閥門選型
HOT AND COLD DOMESTIC WATER SERVICE SPECIFICATIONS
通徑DN65以下的管線控制閥
LINE CONTROL VALVES 2 1/2” AND SMALLER
球閥：
BALL VALVES:
這類閥門具有額定150 psi的安全工作壓力，非沖擊冷水壓力可達600 psi，兩件式鑄青銅閥體，聚四氟乙
烯閥座，標準流道，分離式壓縮螺母，可調節閥桿填料，防吹出閥桿和鍍鉻黃銅/青銅球體。在需要關注壓降的
地方，應采用不縮徑全流道球閥或類似結構的閥門。閥門連接端口應該具有足夠深度的美國國家標準協會ANSI
螺紋，或加長焊接端口，并按照美國閥門和管件制造商標準化協會MSS-SP110標準制造。
Valves shall be rated 150 psi SWP and 600 psi nonshock CWP and will have 2-pc. cast bronze
bodies, TFE seats, standard port, separate pack nut with adjustable stem packing, anti-blowout
stems and chrome-plated brass/bronze ball. Where pressure drop is a concern, full-port ball
valves of like construction are to be used. Valve ends shall have full depth ANSI threads or
extended solder connections and be manufactured to comply with MSS-SP110.
注：如果管道需要保溫隔熱或絕緣，那么球閥就要配置耐熱絕緣材料的2英寸加長手柄，還需要配置
保護套筒，這樣在操作閥門時不會破壞蒸汽密封或保溫隔熱絕緣層。如果應用在保溫隔熱絕緣環境，需要具備
可全程調節的操作點記憶功能。
NOTE: Where piping is insulated, ball valves shall be equipped with 2” extended handles of
non-thermal conductive material. Also provide a protective sleeve that allows operation of the
valve without breaking the vapor seal or disturbing the insulation. Memory stops, which are full
adjustable after insulation is applied, shall be included.
閘閥：
GATE VALVES:
明桿：這種閥門工作壓力是125磅級和200 psi冷水壓力，明桿，管接頭式閥蓋，實心楔板，并按照美國閥
門和管件制造商標準化協會MSS-SP 80標準制造。閥體，閥蓋和楔板材質符合美國材料試驗協會ASTM B 62標準
青銅。閥桿材質是符合美國材料試驗協會ASTM B 371標準抗失鋅現象的硅青銅，或B 99低鋅合金，不含石棉的
填料，和可鍛或球墨鑄鐵手輪。如果工作壓力比較高，接近150 psi，則應該采用150磅級管接頭閥蓋或類似結
構的閥門。閥門連接方式應該是螺紋或焊接。
Rising Stem: Valves shall be Class 125 and 200 psi CWP, rising stem, union bonnet, solid
wedge and manufactured in accordance with MSS-SP 80. Body, bonnet and wedge are to be of bronze
ASTM B 62. Stems shall be of dezincification-resistant silicon bronze ASTM B 371 or low-zinc
alloy B 99, non-asbestos packing and malleable or ductile iron handwheel. Where higher operating
pressures approach 150 psi, Class 150 union bonnet valves of like construction will be used.
Valve ends may be threaded or solder-type.
暗桿：這種閥門工作壓力是125磅級和200 psi冷水壓力，暗桿，螺紋旋進閥蓋，實心楔板，并按照美國閥
門和管件制造商標準化協會MSS-SP 80標準制造。閥體，閥蓋，外部填料函和楔板材質是符合美國材料試驗協會
ASTM B 62標準的青銅。閥桿材質是符合美國材料試驗協會ASTM B371標準的抗失鋅現象的硅青銅或B 99標準的
低鋅合金，不含石棉的填料，可鍛或球墨鑄鐵手輪。如果工作壓力比較高，接近150 psi，則應該采用150磅級
管接頭閥蓋或類似結構的閥門。閥門連接方式應該是螺紋或焊接。
Non-Rising Stem: Valves shall be Class 125 and 200 psi CWP, nonrising stem, screw-in bonnet,
solid wedge and manufactured in accordance with MSS-SP 80. Body, bonnet, external stuffing box
and wedge are to be of bronze ASTM B 62. Stems shall be of dezincification-resistant silicon
bronze ASTM B 371 or low-zinc alloy B 99, nonasbestos packing and malleable or ductile iron
handwheel. Where higher operating pressures approach 150 psi, Class 150 union bonnet valves of
like construction will be used. Valve ends may be threaded or solder-type
截止閥/角閥：
GLOBE/ANGLE VALVES:
這種閥門工作壓力是125磅級，并按照美國閥門和管件制造標準化協會MSS-SP 80標準制造；閥體和閥蓋材
質是符合美國材料試驗協會ASTM B 62標準的青銅。閥桿材質是符合美國材料試驗協會ASTM B371標準的抗失鋅
現象的硅青銅或B 99標準的低鋅合金，不含石棉的填料，聚四氟乙烯閥座閥瓣，可鍛或球墨鑄鐵手輪。如果工
作壓力比較高，接近150 psi，則應該采用150磅級管接頭閥蓋或類似結構的閥門。閥門連接方式應該是螺紋或
焊接。
Valves shall be Class 125 and manufactured in accordance with MSS-SP 80; body and bonnet are
to be of bronze ASTM B 62. Stems shall be of dezincification-resistant silicon bronze ASTM B 371
or low-zinc alloy B 99, non-asbestos packing,
TFE seat disc and malleable or ductile iron handwheel. Where higher operating pressures approach
150 psi, Class 150 union bonnet valves of like construction will be used. Valve ends may be
threaded or solder type.
通徑DN65以上的管線控制閥
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶閥：
BUTTERFLY VALVES:
這類閥門應該是凸耳或國際管道標準I.P.S.管狀連接端口閥體，并按照美國閥門和管件制造商標準化協會
MSS-SP67標準制造；通徑DN50～DN300的閥門額定工作壓力是200 psi非沖擊冷水，DN350以上是150 psi。用于
保溫隔熱絕緣的閥體具有2英寸的加長管徑，材質是鑄鐵或球墨鑄鐵。蝶板材質是鋁青銅合金，配置三元乙丙橡
膠閥座和密封；或三元乙丙橡膠涂層蝶板，配置聚合物涂層閥體。閥桿應該是400系列不銹鋼，不能將閥桿暴露
在蝶板緊固件上。通徑DN65至DN150應該配置具有10個位置節流板的操作手柄；通徑DN200以上的蝶閥應該配置
齒輪操作機構。凸耳結構和開槽結構蝶閥應該能夠用作隔斷閥，而且不需要下游法蘭也可以在全壓力下用作管
道終端。
Valves shall be lug or I.P.S. grooved body style manufactured in accordance with MSS-SP67; 2"
- 12" rated at least 200 psi non-shock cold water working pressure, 14" and larger rated at 150
psi. Body to have 2" extended neck for insulating and to be cast iron or ductile iron. Valve to
have aluminum bronze alloy disc with EPDM rubber seat and seals; or EPDM rubber encapsulated disc
with polymer-coated body. Stem shall be 400 series stainless steel and shall not have exposed
stem to disc fasteners. Sizes 2 1/2"-6" shall be lever operated with 10-position throttling
plate; sizes 8" and larger shall have gear operators. Lug-style and grooved style shall be
capable for use as isolation valves and recommended by manufacturer or dead-end service at full
pressure without the need for downstream flanges.
閘閥，截止閥/角閥：
GATE, GLOBE/ANGLE VALVES:
這些閥門工作壓力為125磅級，并按照美國閥門與管件制造商標準化協會MSS-SP70（閘閥）標準或MSS-SP85
（截止閥/角閥）標準制造，法蘭連接，螺栓閥蓋，OS&Y，鑄鐵閥體，青銅閥內件，閥體和閥蓋材質符合美國材
料試驗協會ASTM A 126級別B鑄鐵標準，填料和襯墊不含石棉。
Valves to be Class 125 manufactured in accordance with MSS-SP70 (gate) or MSS-SP85
(globe/angle), flanged, bolted bonnet, OS&Y, iron body, bronze trimmed, with body and bonnet
conforming to ASTM A 126 class B cast iron. Packing and gaskets to be non-asbestos.
止回閥：
CHECK VALVES:
通徑DN65以下的止回閥應該采用Y形旋啟式結構，并按照美國閥門和管件制造商標準化協會MSS-SP80標準制
造，工作壓力125磅級，符合美國材料試驗協會ASTM B 62標準的青銅閥體，配置聚四氟乙烯閥座閥座閥瓣。如
果工作壓力比較高，接近150 psi，則應該采用150磅級管接頭閥蓋或類似結構的閥門。閥門連接方式應該是螺
紋或焊接。
2 1/2”and smaller shall be Y-pattern swing-type manufactured in accordance with MSS-SP80,
Class 125, bronze ASTM B 62 body with TFE seat disc. Where higher operating pressures approach
150 psi, Class 150 valves of like construction shall be used. Valve ends may be threaded or
solder-type.
通徑DN65以上的蝶閥應該采用旋啟式結構，并按照美國閥門和管件制造商標準協會MSS-SP71標準制造，125
磅級，法蘭連接，符合美國材料試驗協會ASTM A 126級別B標準的鑄鐵閥體和青銅閥內件，不含石棉的襯墊。也
可以采用平板式結構，配置不銹鋼彈簧，青銅閥瓣，橡膠閥座，符合美國材料試驗協會ASTM A 126級別B標準的
鑄鐵閥體，或A 48標準的125磅級或150磅級法蘭。彈簧執行機構止回閥用于管道排放。外置操作手柄和彈簧執
行機構的旋啟式止回閥用于污水坑、排污和雨水排泄管道。
2 1/2" and larger shall be swing-type manufactured in accordance with MSS-SP71, Class 125,
flanged ASTM A 126 Class B cast iron body with bronze trim, non-asbestos gasket. Or wafer-style
with stainless steel spring, bronze disc plates, rubber seat, body of cast iron ASTM A 126 Class
B or A 48 for use with Class 125/150 flanges. Spring-actuated valve to be used on pump discharge.
Swing check with outside lever and spring to be used on sump, sewage and storm drain lines.
流量平衡閥門：
CIRCUIT BALANCING VALVES:
用于室內熱水管道系統的通徑DN15至DN50流量平衡閥應該是美國尼伯科截止閥結構，1710系列。閥門應該
配置用于流量平衡和流量測量的整體測試端口。測試端口應該內置止回閥并配置閥蓋。閥門材質應該是抗失鋅
現象的黃銅或青銅，壓力－溫度等級為121oC，240 psi。所有流量平衡閥均配置位置指示器讀數，并內置操作
位置記憶裝置，用于重復調節和控制。
Circuit Balancing Valves 1/2" to 2" for domestic hot water service shall be NIBCO Globe
Style, Series 1710. Valve shall have integral metering/test ports for flow balancing and flow
measurement. Test ports shall have internal check valve and be equipped with caps. Valves shall
be manufactured from dezincification resistant brass or bronze rated 240 psi at 250°F. All
balancing valves shall have position indication readout and built in memory stop for repeatable
regulation and control.
五、熱水暖氣系統閥門選型
HOT WATER HEATING SERVICE SPECIFICATIONS
通徑DN65以下管線控制閥
LINE CONTROL VALVES 2 1/2" AND SMALLER
球閥：
BALL VALVES:
這類閥門的額定安全工作壓力為150 psi，非沖擊冷水工作壓力為600 psi，兩件式鑄青銅閥體，聚四氟乙
烯閥座，標準流道，分離式包裝螺母，配置可調節閥桿填料，防吹出閥桿和鍍鉻黃銅/青銅球體。在需要關注壓
降的地方，需要采用不縮徑全流道球閥或類似結構的閥門。閥門連接端口應該具有足夠深度的美國國家標準協
會ANSI螺紋，或加長焊接端口，并按照美國閥門和管件制造商標準化協會MSS-SP110標準制造。
Valves shall be rated 150 psi SWP and 600 psi non-shock CWP and will have 2-pc. cast bronze
bodies, TFE seats, standard port, separate packnut with adjustable stem packing, anti-blowout
stems and chrome-plated brass/bronze ball. Where pressure drop is a concern, full-port ball
valves of like construction are to be used. Valve ends shall have full depth ANSI threads or
extended solder connections and be manufactured to comply with MSS-SP110
注：如果管道需要保溫隔熱或絕緣，那么球閥就要配置耐熱絕緣材料的2英寸加長手柄，還需要配置
保護套筒，這樣在操作閥門時不會破壞蒸汽密封或保溫隔熱絕緣層。如果應用在保溫隔熱絕緣環境，需要包括
可全程調節的操作點記憶功能。
NOTE: Where piping is insulated, ball valves shall be equipped with 2" extended handles of
non-thermal conductive material. Also, provide a protective sleeve that allows operation of the
valve without breaking the vapor seal or disturbing the insulation. Memory stops, which are fully
adjustable after insulation is applied, shall be included.
閘閥：
GATE VALVES:
明桿：這種閥門工作壓力是125磅級，明桿，管接頭式閥蓋，實心楔板，并按照美國閥門和管件制造商標準
化協會MSS-SP 80標準制造。閥體，閥蓋和楔板材質符合美國材料試驗協會ASTM B 62標準青銅。閥桿材質是符
合美國材料試驗協會ASTM B 371標準抗失鋅現象的硅青銅，或B 99低鋅合金，不含石棉的填料，和可鍛或球墨
鑄鐵手輪。
Valves shall be Class 125 rising stem, union bonnet, solid wedge and manufactured in
accordance with MSS-SP80. Body, bonnet and wedge are to be of bronze ASTM B 62. Stems shall be of
dezincification-resistant silicon bronze ASTM B 371 or low-zinc alloy B 99, non-asbestos packing
and malleable or ductile iron handwheel. Valve ends may be threaded or solder type.
截止閥/角閥：
GLOBE/ANGLE VALVES:
這種閥門工作壓力是125磅級，并按照美國閥門和管件制造標準化協會MSS-SP 80標準制造；閥體和閥蓋材
質是符合美國材料試驗協會ASTM B 62標準的青銅。閥桿材質是符合美國材料試驗協會ASTM B371標準的抗失鋅
現象的硅青銅或B 99標準的低鋅合金，不含石棉的填料，聚四氟乙烯閥座閥瓣，可鍛或球墨鑄鐵手輪。
Valves shall be Class 125 and manufactured in accordance with MSS-SP80, body and bonnet are
to be of bronze ASTM B 62. Stems shall be of dezincificationresistant silicon bronze ASTM B 371
or low-zinc alloy B 99, non-asbestos packing, TFE seat disc and malleable or ductile iron
handwheel
通徑DN65以上的管線控制閥
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶閥：
BUTTERFLY VALVES:
這類閥門應該是凸耳或國際管道標準I.P.S.管狀連接端口閥體，并按照美國閥門和管件制造商標準化協會
MSS-SP67標準制造；通徑DN50～DN300額定工作壓力是200 psi非沖擊冷水，DN350以上是150 psi。用于保溫隔
熱絕緣的閥體具有2英寸的加長管徑，材質是鑄鐵或球墨鑄鐵。蝶板材質是鋁青銅合金，配置三元乙丙橡膠閥座
和密封；或三元乙丙橡膠涂層蝶板，配置聚合物涂層閥體。閥桿應該是400系列不銹鋼，不能將閥桿暴露在蝶板
緊固件上。通徑DN65至DN150應該配置具有10個位置節流板的操作手柄；通徑DN200以上的蝶閥應該配置齒輪操
作機構。凸耳結構和管狀結構蝶閥應該能夠用作隔斷閥，而且不需要下游法蘭也可以在全壓力下用作管道終端
。
Valves shall be lug or I.P.S. grooved body style manufactured in accordance with MSS-SP67;
2"-12" rated at least 200 psi non-shock cold water working pressure, 14" and larger rated at 150
psi. Body to have 2" extended neck for insulating and to be cast iron or ductile iron. Valve to
have aluminum bronze alloy disc with EPDM rubber seat and seals; or EPDM rubber encapsulated disc
with polymer-coated body. Stem shall be 400 series stainless steel and shall not have exposed
stem to disc fasteners. Sizes 2 1/2"-6" shall be lever operated with 10-position throttling
plate; sizes 8" and larger shall have gear operators. Lug-style and grooved style shall be
capable for use as isolation valves and recommended by manufacturer or dead-end service at full
pressure without the need for downstream flanges.
閘閥，截止閥/角閥：
GATE, GLOBE/ANGLE VALVES:
這些閥門工作壓力為125磅級，并按照美國閥門與管件制造商標準化協會MSS-SP70（閘閥）標準或MSS-SP85
（截止閥/角閥）標準制造，法蘭連接，螺栓閥蓋，OS&Y，鑄鐵閥體，青銅閥內件，閥體和閥蓋材質符合美國材
料試驗協會ASTM A 126級別B鑄鐵標準，填料和襯墊不含石棉。
Valves to be Class 125 manufactured in accordance with MSS-SP70 (gate) or MSS-SP85
(globe/angle), flanged, bolted bonnet, OS&Y, iron body, bronze trimmed, with body and bonnet
conforming to ASTM A 126 Class B cast iron. Packing and gaskets to be non-asbestos.
止回閥：
CHECK VALVES:
通徑DN65以下的止回閥應該采用Y形旋啟式結構，并按照美國閥門和管件制造商標準化協會MSS-SP80標準制
造，工作壓力125磅級，符合美國材料試驗協會ASTM B 62標準的青銅閥體，配置聚四氟乙烯閥座閥座閥瓣。
2 1/2"and smaller shall be Y-pattern swing-type manufactured in accordance with MSS-SP80,
Class 125, bronze ASTM B 62 body with TFE seat disc.
通徑DN65以上的止回閥應該采用旋啟式結構，并按照美國閥門和管件制造商標準協會MSS-SP71標準制造，
125磅級，法蘭連接，符合美國材料試驗協會ASTM A 126級別B標準的鑄鐵閥體和青銅閥內件，不含石棉的襯墊
。也可以采用平板式結構，配置不銹鋼彈簧，青銅閥瓣，橡膠閥座，符合美國材料試驗協會ASTM A 126級別B標
準的鑄鐵閥體，或A 48標準的125磅級或150磅級法蘭。
2 1/2" and larger shall be swing-type manufactured in accordance with MSS-SP71, Class 125,
flanged ASTM A 126 Class B cast iron body with bronze trim, non-asbestos gasket. Or wafer-style
with stainless steel spring, bronze disc plates, rubber seat, body of cast iron ASTM A 126 Class
B or A 48 for use with Class 125/150 flanges.
六、噴灑滅火器和消防系統閥門選型
FIRE SPRINKLER AND FIRE PROTECTION SYSTEM SPECIFICATIONS
通徑DN65以下管線控制閥
LINE CONTROL VALVES 2 1/2" AND SMALLER
閘閥：
GATE VALVES:
額定水工作壓力應該在175 psi以上，閥體和閥蓋材料為符合美國材料試驗協會ASTM B 62標準的鑄青銅合
金。閥門結構為OS&Y和螺紋連接。閥門應獲得美國UL認證、FM認證，并符合美國閥門和管件制造商標準化協會
MSS-SP80標準。
Shall have approval rating 175 psi WWP or greater with body and bonnet made from cast bronze
alloy ASTM B 62. Valve to be of OS&Y design with threaded ends. Valve to be Underwriters
Laboratories® listed, Factory Mutual Approved and in compliance with MSS-SP80.
球閥：
BALL VALVES:
額定水工作壓力應該在175 psi以上，并采用聚四氟乙烯閥座。這類閥門應該配置不受氣候影響的齒輪執行
機構，可用于室內/室外，具有上升位置指示器和兩個內置監控開關。這類閥門應該是螺紋連接或開槽連接，并
獲得美國UL認證、FM認證，并符合美國閥門和管件制造商標準化協會MSS-SP110標準。
Shall have approval rating 175 psi WWP or greater with TFE seats. Valve to have weatherproof
gear operator rated for indoor/outdoor use with raised position indicator and two internal
supervisory switches. Valves shall have threaded or
I.P.S. grooved ends and will be Underwriters Laboratories listed, Factory Mutual Approved and in
compliance with MSS-SP110
通徑DN65以上管線控制閥
LINE CONTROL VALVES 2 1/2" AND LARGER
閘閥：
GATE VALVES:
額定水工作壓力應該在175 psi以上，鑄鐵閥體和青銅閥內件，或彈性橡膠密封楔板。閥體和閥蓋應該采用
符合美國材料試驗協會ASTM A 126級別B的鑄鐵合金，或ASTM A 536球墨鑄鐵，配置OS&Y類型的閥蓋。如果采用
彈性楔板結構，閥內部就必須用環氧樹脂涂覆。閥桿預制開槽管，可在需要時配置監控開關。連接方式為125磅
級法蘭連接或開槽連接。這類閥門應該通過美國UL認證、FM認證或符合美國閥門和管件制造商標準化協會MSS-
SP70標準。
Shall have approval rating of 175 psi WWP or greater, iron body with bronze trim or with
resilient rubber encapsulated wedge. Body and bonnet to be of either cast iron alloy ASTM A 126
Class B or ductile iron ASTM A 536 with OS&Y type bonnet. If of resilient wedge design, interior
of valve to be epoxy-coated. Valve stem to be pre-grooved for use with supervisory switch, if
required. Ends to be flanged Class 125 or grooved. Valves to be Underwriters Laboratories listed,
Factory Mutual Approved and in compliance with MSS-SP70.
配置閘閥的指示器柱：
INDICATOR POSTS WITH GATE VALVES:
通徑DN100以上的這類閘閥額定水工作壓力應該不小于175 psi，配置青銅閥內件和彈性橡膠密封楔板。閥
體和閥蓋材質是符合美國材料試驗協會ASTM A126級別B標準的鑄鐵合金或ASTM A536標準的球墨鑄鐵，配置閥蓋
、一體化指示器柱安裝法蘭。如果采用彈性楔板結構，閥內部就要涂覆環氧樹脂。連接端口是125磅級法蘭或機
械連接。立式指示器柱是可調節的，適用于深度掩埋。閥門和指示器柱應該獲得美國UL認證、FM認證，并且符
合美國閥門和管件制造商標準化協會MSS-SP70標準。
Sizes 4" and larger shall have approval rating of 175 psi WWP or greater with bronze trim or
with resilient rubber encapsulated wedge. Body and bonnet are to be of either cast iron alloy
ASTM A 126 Class B or ductile iron ASTM A 536 with bonnet, incorporating indicator post mounting
flange. If resilient wedge design, interior of valve to be epoxy-coated. Ends to be flanged Class
125 or mechanical joint. Upright indicator post to be adjustable for bury depth required. Valves
and posts to be Underwriters Laboratories listed and Factory Mutual Approved. Where applicable,
valves to be in compliance with MSS-SP70
止回閥：
CHECK VALVES:
這類止回閥額定水工作壓力應該不小于175 psi，配置青銅閥內件和橡膠－金屬閥座。閥體材質應該是符合
美國材料試驗協會ASTM A 126級別B鑄鐵合金。連接端口應該是法蘭或平板式（對夾式）。閥門應該獲得美國UL
認證、FM認證，并且符合美國閥門和管件制造商標準化協會MSS-SP71標準。
Shall have approval rating of 175 psi WWP or greater with bronze trim and rubber to metal
seating. Body to be of cast iron alloy ASTM A 126 Class B. Ends to be flanged or wafer for use
with Class 125/150 flanges. Valves to be Underwriters Laboratories listed, Factory Mutual
Approved and, where applicable, in compliance with MSS-SP71.
通徑DN65以上的管線控制閥
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶閥：
BUTTERFLY VALVES:
額定水工作壓力應該不小于175 psi。閥門應該配置不受氣候影響的、可用于室內或室外的、帶有手輪的齒
輪執行機構，和凸起的位置指示器和兩個內置監控開關。閥體材質采用符合美國材料試驗協會ASTM A 395或A
536標準的球墨鑄鐵，閥桿采用400系列不銹鋼。閥門連接方式是平板式（對夾式），可用于在125/150磅級法蘭
或IPS管狀之間安裝連接。這類閥門應該獲得美國UL認證、FM認證，并符合美國閥門和管件制造商標準化協會
MSS-SP67標準。
Shall have approval rating of 175 psi WWP or greater. Valve to have weatherproof gear
operator rated for indoor/outdoor use with handwheel and raised position indicator and two
internal supervisory switches. Bodies to be from cast ductile iron ASTM A 395 or A 536 and stems
to be 400 series stainless steel. Valves shall be wafer style for installation between Class
125/150 flanges or I.P.S. grooved. Valves to be Underwriters Laboratories listed, Factory Mutual
Approved and in compliance with MSS-SP67.
高桿閘閥：
HI-RISE SERVICE GATE VALVES:
額定水工作壓力不小于300 psi。OS&Y閥蓋和閥體材質應該是符合美國材料試驗協會ASTM A 126級別B標準
的鑄鐵合金。閥門連接方式應該是法蘭連接，并采用250磅級或300磅級法蘭。這類閥門應該通過美國UL認證、
FM認證或符合美國閥門和管件制造商標準化協會MSS-SP70標準。
Shall have approval rating of 300 psi WWP or greater. OS&Y bonnet and body to be of cast iron
alloy ASTM A 126 Class B. Valves to be flanged ends for use with Class 250/300 flanges. Valves to
be Underwriters Laboratories listed, Factory Mutual approved and in compliance with MSS-SP70.
高桿止回閥：
HI-RISE SERVICE GATE VALVES:
額定水工作壓力不小于300 psi。這類止回閥應該采用水平旋啟式止回閥，配置青銅閥內件，OS&Y閥蓋和閥
體材質應該是符合美國材料試驗協會ASTM A 126級別B標準的鑄鐵合金。閥門連接方式應該是法蘭連接，并采用
250磅級或300磅級法蘭。這類閥門應該通過美國UL認證、FM認證或符合美國閥門和管件制造商標準化協會MSS-
SP70標準。
Shall have approval rating of 300 psi WWP or greater. Valves to be of the horizontal swing
check design with bronze trim and body made from cast iron alloy ASTM A 126 Class B. Valves to be
flanged ends for use with Class 250/300 flanges. Valves to be approved by the New York City
Materials and Equipment Acceptance (M.E.A.) Division and in compliance with MSS-SP71.
通徑DN65以下的排水閥
TRIM AND DRAIN VALVES 2 1/2" AND LARGER
球閥：
BALL VALVES:
額定水工作壓力不小于175 psi。閥門應配置聚四氟乙烯閥座，螺紋連接，防吹出閥桿和桿狀手柄。這類閥
門應該獲得美國UL認證、FM認證適用于排水系統，或符合美國閥門和管件制造商標準化協會MSS-SP110標準。
To have approval rating of 175 psi WWP or greater. Valve to have TFE seats, threaded ends,
blowout-proof stem and lever handle. Valve to be Underwriters Laboratories listed and Factory
Mutual Approved for trim and drain service and in compliance with MSS-SP-110.
截止閥/角閥：
GLOBE/ANGLE VALVES:
額定水工作壓力不小于175 psi。閥門應該配置橡膠閥座閥瓣和螺紋連接端口。這類閥門應獲得美國UL認證
適用于排水系統。
To have approval rating of 175 psi WWP or greater. Valves to have rubber seat disc and
threaded ends. Valves to be Underwriters Laboratories listed for trim and drain service.
止回閥：
CHECK VALVES:
額定水工作壓力不小于175 psi。閥門應該配置橡膠閥座閥瓣和螺紋連接端口。閥門應該是Y形水平旋啟式
。這類閥門應符合美國閥門和管件制造商標準化協會MSS-SP80標準。
To be rated 175 psi or greater. Valves to have rubber seat discs and threaded ends. Valve to
be Y-pattern horizontal swing-type. Valve shall be in compliance with MSS-SP80.
